Plinth
A one-product page template for makers. Shown here with the Orrery Lamp: a desk lamp turned from solid brass, with two rings that circle the shade like planets, made by hand by Hale & Fen in a numbered batch of 60.
€340
Buy the lamp Details

In detail
Every part is cut, bent and finished in our workshop. Nothing is cast, nothing is plated.

The shade and its rings
Two rings of 2 mm brass wire cross around the shade. Turn them by hand and the light throws a different shadow on the wall.

The joint
A knurled thumb screw holds the arm at any angle. Loosen half a turn, tilt, tighten. No springs to wear out.

The base
Turned from one 1.6 kg brass bar, so the lamp stands firm with the arm fully out. The toggle switch sits on top, where your hand finds it.
Specs
Measured on lamp no. 1 of the batch.
46 cm
Height, arm upright
2.4 kg
Weight
E14 LED, 4 W
Bulb, 2700 K warm white, included
2 m textile
Cable, braided grey, EU or UK plug
Brushed brass
Finish, unlacquered, darkens with time
60 lamps
Batch size, each one numbered under the base
How it’s made
Four steps and about eleven hours of work for every lamp, all of it at one bench in our workshop.

Turned on the lathe
The base and the stem start as solid brass bar. Fen turns them on a small lathe, slowly, so the rings on the base stay fine and even.

Rings bent by hand
The two orrery rings are bent around a steel jig and closed with a silver-soldered joint you will have to look for.

Finished by hand
Every part is brushed by hand to a soft satin. We leave the brass unlacquered, so it takes on the colour of the room it lives in.

Wired and tested
Hale wires each lamp, runs it for 24 hours and engraves its number under the base before it goes into the box.
What owners say
“It is the first thing I switch on in the morning and the last thing I switch off. Lamp no. 12 has gone a lovely honey colour in six months.”
Mara Lindqvist, Malmö
“Heavy, quiet and exactly as bright as a desk lamp should be. The rings make a slow pattern on the ceiling that my kids love.”
Tomás Ferreira, Porto
“I bought it for the looks and kept it for the joint. Six months of daily tilting and it still holds the arm where I leave it.”
Ines Okoro, Leeds
Questions
Batch 2 ships in March
Batch 1 is nearly gone. Leave your email and you hear first when the next 60 lamps are ready to order.
Join the list Shipping